Picture #1:
Here is the GrillCraft MX Series Lower mesh grille kit 3pc for the Scion TC Part# TOY-1873 or Part# TOY-1871 1pc Lower center only available in silver and black powder coated finishes.
Picture #2:
Our project Scion TC in need of a GrillCraft custom grille.
Picture #3:
Open the hood and remove the plastic clips as shown.
Picture #4:
Remove the rubber stop as shown.
Picture #5:
Remove the plastic clip using a screw driver.
Picture #6:
Remove the 10mm bolt in the fender well area.
Picture #7:
Peel the front section of the splash shield back as shown.
Picture #8:
Remove the screw that are located behind the splash shield.
Picture #9:
Remove the bolt located on the under side of the bumper lower corners.
Picture #10:
Remove the bolts located on the under side of bumper front section.
Picture #11:
Pull bumper cover forward and it will come off the vehicle.
Picture #12:
Place the lower grille in from the front side of the opening. Hold firmly in place against stock plastic grille insert and mark mounting tab center holes.
Picture #13:
Drill 3/16 holes for the mounting screws.
Picture #14:
Remove factory plastic grille insert. This will no longer be needed.
Picture #15:
Place lower grille into opening once again.
Picture #16:
Attach lower grille with supplied hardware.
Picture #17:
Note: "Flat" nut on the backside of the bumper.
Picture #18:
Next lets install the OPTIONAL: side vent griles. Remove plastic side vent inserts.
Picture #19:
Place vent grille into opening and mark the side pin location.
Picture #20:
Drill 3/16 hole for side pin.
Picture #21:
Mount side vent in opening and mark mount tab center hole location.
Picture #22:
Drill 3/16 hole for mounting screw.
Picture #23:
Place mounting screw into the tab as shown.
Picture #24:
Place vent grille in place and fasten.
Picture #25:
Fasten side vent grille in place.
Picture #26:
Fits like a glove!!!!!!
Picture #27:
Looking good with Grillcraft
Picture #28:
Wow what a difference the new Grillcraft custom grille makes. Shown here with optional upper grille kit.